Features |
|
Analogue Output REM |
|
Datasheet are in PDF format and require Adobe Acrobat Reader |
|
The Innotech GENII AO REM Analogue Output Module is an expansion device for the GENESIS range of Digital Controllers.
The module is powered by 24VAC and provides 5 analogue outputs to be connected to field equipment. Jumpers on the board allow either 0-10V or heat valve (PWM) style outputs to be selected for each channel.
The GENII AO REM may be located remotely from the GENESIS Digital Controller and providing distributed analogue outputs for the system.
The GENII AO REM is configured and programmed via the GENESIS Digital Controller. The GENII AO REM communicates with the Genesis Controller via the REM Comms port. The remote link uses RS-485 at a baud rate of 38400. |
|
· 5 Analogue Outputs. · Each output is configurable as 0-10V or heat valve (PWM). · Remote output of analogue control voltage points up to 1600feet from the GENESIS Controller. · Housed in a low profile din rail mounted enclosure. · RS485 interconnection between REM modules. · Galvanic Isolation for communications to prevent grounding problems. · 24VAC operation. · JUMPER selectable Address. · Wiring Diagrams for modules generated by GEN2Config Software. · LED indication of network traffic assists network setup & debugging. · Up to 15 expansion modules per controller can be added |
|
Innotech Controls America |
|
Innotech Control Systems |