Features |
|
Digital Output REM |
|
Datasheet are in PDF format and require Adobe Acrobat Reader |
|
· Five Relay Outputs 2Α @ 24V AC - Normally open contacts. · LED indication of Relay status. · Remote control of output points via five relay outputs, up to 1600’ from the GENESIS Controller. · Housed in a low profile din rail mounted enclosure. · RS485 interconnection between REM Modules. · Galvanic Isolation for communications to prevent grounding problems. · 24V AC operation. · JUMPER selectable Address. · Wiring Diagrams for modules generated by GEN2Config Software. · LED indication of Comms activity to assist in network setup and debugging. · Up to 15 expansion modules per controller can be added |
|
The Innotech GENII DO REM Relay Output Module is an expansion device for the GENESIS range of Digital Controllers.
The module is powered by 24VAC and provides 5 relay outputs to control or switch field equipment. The relays have normally open contacts than can handle up to 2 amps at 24V AC.
The GENII DO REM may be located remotely from the GENESIS Digital Controller providing distributed relay outputs for the system.
The GENII DO REM is configured and programmed via the GENESIS Controller. The GENII DO REM communicates with the Genesis Controller via the REM Comms port. The remote link uses RS-485 at a baud rate of 38400. |
|
Innotech Controls America |
|
Innotech Control Systems |