Features |
|
Isolated Digital Input REM |
|
Datasheet are in PDF format and require Adobe Acrobat Reader |
|
· 5 Optically isolated digital inputs · LED indication of input status. · Remote sensing and control of I/O points, up to 1600’ from the Genesis Controller. · Housed in a low profile din rail mounted enclosure. · RS485 interconnection between REM Modules. · Galvanic Isolation for communications to prevent grounding problems. · 24V AC operation. · JUMPER selectable Address. · Wiring Diagrams for modules generated by GEN2Config Software. · LED indication of Comms activity to assist in network setup and debugging. · Up to 15 expansion modules per controller can be added |
|
The Innotech GENII IDI REM Opto Isolated Digital Inputs Module is an expansion device for the GENESIS range of Digital Controllers.
The module is powered by 24VAC and provides 5 opto isolated digital inputs to sense signals from field equipment.
The voltage detection range is 12 to 24 volts AC or DC. The GENII IDI REM may be located remotely from the GENESIS Controller providing distributed digital inputs for the system.
The GENII IDI REM is configured and programmed via the GENESIS Controller. The GENII IDI REM communicates with the Genesis Controller via the REM Comms port. The remote link uses RS-485 at a baud rate of 38400. |
|
Innotech Controls America |
|
Innotech Control Systems |