Features |
|
· 500 millisecond cycle/scan time · 20 configurable universal inputs · 12 digital relay outputs · 8 analogue outputs · Optional user interface on a 4 line, 20 character LCD display · Optional Ethernet connection for Net Comms · Status of I/O points displayed on LCD · 80 user defined watches (up to eight pages of up to 10 watches) · Data logging of 2MBytes, up to 300,000 readings · 1 RS485 serial communications port for Net Comms · 1 RS485 serial communications port for Global Comms · User Selectable Baud Rates: (a) Net 9600 Global 4800 OR (b) Net 57600 Global 38400 · All wire connections by 2.5mm plug-in screw terminals · Program resides in non-volatile Flash Ram |
|
Maxim III |
|
Datasheet are in PDF format and require Adobe Acrobat Reader |
|
The Innotech MAXIM III Controller is a state of the art digital processing system that has the capability of controlling various types of industrial, commercial and domestic systems.
The MAXIM III can operate as a standalone device, using its own universal inputs and analogue and digital outputs to receive information and control external equipment, or as part of a network of Innotech devices that support Global NetComms.
The MAXIM III's configuration program Maxcon, is developed on a computer using a Windows based program. This allows the user to configure the internal processes of the MAXIM III by using a graphical programming tool. The user places various process blocks and interconnecting lines to design the required control algorithm for the system.
The configuration program can be downloaded to the Maxim III with an RS485 serial link, using the connector on the right side of the case to link to the computer via a 485/USB converter, or with an optional Ethernet link, using the RJ45 connector on the bottom right side of the case. |
|
Innotech Controls America |
|
Innotech Control Systems |