Features |
|
Modem Printer Interface |
|
Datasheet are in PDF format and require Adobe Acrobat Reader |
|
· Programmable via the Gen2Config or MaxCon software package to meet the varying needs of any installation. · Monitors the “Global Comms” for Alarms, and initiates a dial out via the modem to remote locations designated in the dialing list. · Monitors the “Global Comms” for system values and variables designated for printout to the printer. · Provides control of the modem to allow dial in from a remote location. · Allows GEN2 or MAX programs to access any Genesis or Maxim device on the “Net Comms” channel. · Permits direct Alarm reporting to Telecom pager via modem. · Permits direct Alert reporting to Telecom digital phone with short message service (SMS) facility. · Supports fax out using a Class II modem. · Supports GEN2ALERT software on local or remote PC for alarm reporting. · LED indication of GENII MPI ISOL mode. · LED indication of COMMS activity. · Service Mode to prevent alarm dial outs during system maintenance. · Alarm acknowledge to reset alarm output relay. · Mode selection allows PC to use modem for other functions. |
|
The Innotech MPI is: · a Gateway into a Network from a remote location.
· Gateway out from a GENESIS or MAXIM Device on the Network to remote service providers for alarm notification.
· Local centralised point for alarm notification.
· Local centralised point for alarm printout and hard copy recording to its local printer of any data broadcast as a “Global COMMS” by any GENESIS or MAXIM Device on the Network. |
|
Innotech Controls America |
|
Innotech Control Systems |